How LynxVision works
How LynxVision works
AI detection on the cameras you already have, turned into actions: open a door, hold a gate, change a light, send an alert. Rules, plate reading, your recorder and what it runs on.
LynxVision runs AI detection on your existing cameras and turns what it sees into an action: open the bay door, hold the gate, turn the light red, send the alert. It is built by IP Lynx and installed by the same crew that wires the site.
See it, decide, act
- Your cameras. No new cameras needed. LynxVision finds the ones on your network (any ONVIF or RTSP camera) or works through your DW Spectrum or Nx Witness recorder. You pick which streams get AI. Not every camera needs it.
- A rule on the picture. Draw a zone or a line on the camera view and say what counts. The rule is the whole configuration.
- A real action. When the rule comes true, LynxVision calls the thing that needs to happen, with the evidence attached.
Rules
Open a camera, draw a polygon around the dock, the gate lane or the back door, or a line across a driveway, or use the full frame. Then pick what should trigger it and how long to wait before it can fire again. Rules live per camera, so a bay with two cameras gets two rules that each do one job.
| Rule type | Fires when |
|---|---|
| Intrusion | Something is inside the zone. |
| Zone entry / Zone exit | Something enters or leaves the zone. |
| Line crossing | Something crosses a line, in one direction or both. |
| Loitering | Something stays in the zone too long. |
| Multiple objects | Too many of them at once. |
Each rule can be limited to people, vehicles or trucks, a minimum confidence, or a particular plate. Rules are set by IP Lynx, or by you.
Actions
- A door, gate, light or relay, through the controller it’s wired to.
- An event inside DW Spectrum or Nx Witness, so the alarm rules, bookmarks, searches and phone notifications you already use react to “truck in bay 2”, not just “motion”.
- A web call to anything with an address: dashboards, alert tools, your own systems.
Cooldowns and timers stop a rule firing twice for the same visit.
Licence plates
LynxVision finds the plate, reads it, and keeps the crop. A known fleet plate can open the gate, and an unknown one at 2 a.m. can send a message with the picture attached. Every read is logged with the time and the camera, and a cooldown means one read per visit, not fifty.
Your recorder stays in charge of video
LynxVision doesn’t replace your video system. A small plugin on the DW Spectrum or Nx Witness recorder turns every detection into an event the recorder understands, with the box drawn on the video, so you can find every plate or event in the recorder’s own search.
Seeing why something happened
The action history shows every rule that fired, which camera, which call it made and what the other system sent back. Plate reads keep the plate image and detections keep the box. When a gate opened for the wrong truck, or didn’t open for the right one, you can see why in a minute.
Things only your site has
People, vehicles and trucks work out of the box. Site-specific detections, such as forklifts in a pedestrian aisle or hard hats at a door, are built with LynxCurator from your own camera footage: we collect examples, a person checks them, and the model gets better with each round. We tell you up front whether a job is off the shelf or a trained one. For checks on a production line, our Lynx Inspect tool learns from a handful of good parts and flags the rest for a person to look at.
What it runs on
- A Windows or Linux server at your site, beside your recorder, or on the recorder itself when it has the headroom.
- Detection runs on your server, so video doesn’t leave the site.
- The licence is checked locally, so an internet outage changes nothing.
- Licensing is by the number of streams the AI watches, not the number of cameras you own: Edge (4 streams), Standard (8), Pro (16) and Enterprise (64).
Pricing is quoted per site after a site assessment, because the server and the controller wiring are part of the job. Book one on the LynxVision page.
Something here out of date, or not what you see on screen? Tell us at support@iplynx.ca and we’ll fix the guide.
Talk to a person.
Call us, open a ticket, or start from Help & Support. You get someone from IP Lynx, not a call centre.
Monday to Friday, 9 to 5 · Ontario, Canada