Doors, emergencies and the records

VantageCore · Guide

Doors, emergencies and the records

Unlocking and locking doors from the app, what each door status means, building-wide emergencies, and where to look when you need to know what happened.

Updated 10 Nov 20264 min readVantageCore product page →

Tap any door, on Home or Doors, to open its controls. The tabs along the bottom of the app are Home, Doors, People, Activity and More. Some screens appear only when your building has the equipment for them.

The three everyday controls

Unlock briefly
Unlocks for the door’s normal unlock time, then it locks itself. Use this for a delivery or a visitor.
Lock
Locks the door now.
Hold unlocked…
Keeps the door unlocked until somebody locks it. Remember to lock it again.

If a door leads into an area that is armed, VantageCore asks before unlocking it. More controls holds Lockdown for one door, plus Recent activity at that door.

What the door status means

StatusWhat it means
LockedLocked and closed. Normal.
Unlocked by scheduleOpen hours: the door’s schedule is keeping it unlocked.
Unlocked by userSomebody unlocked it, from the app or with a card.
Left openUnlocked and propped or held open too long. Go and close it.
Forced openOpened without a card or an unlock. Check the camera and the activity.
Locked downLockdown is on. Cards may be refused until it is cleared.

Emergencies: the whole building

Managers and owners will find these under More → Emergency:

  • Evacuate unlocks every door so people can get out.
  • Lock down locks every door. If that would shut a recorded exit route, it asks you to confirm first.
  • Return to normal puts every door back on its usual schedule.

Each one is recorded with your name and the reason you give. A visitor can’t be let in through the intercom while the building or that door is locked down.

Life safety comes first, and it is not the app

Your fire alarm releases the locks through its own wiring, and exit devices always let people out. VantageCore’s emergency buttons are a convenience on top. In an emergency, call 911 first. We test these modes on your own equipment before handover.

Where to look when you need to know what happened

WhereWhat it answers
ActivityWhat happened at the doors: card reads, doors opened, left open or forced, alarms, controller trouble. Search it, or filter by Access, Alarms or System.
AlarmsWhat needs somebody to look at it. Tick and Acknowledge. Acknowledged shows who dealt with each one, and when.
Audit logEverything anyone did through VantageCore: unlocks, people changed, passes issued, settings. Newest first, with the person and the reason.
ReportsWho is in, Attendance, Activity by person, Quiet fobs nobody has used, and Units. Attendance and activity export to CSV.

“Chain intact”

The audit log’s heading reads Newest first · chain intact. Each record carries a fingerprint of the one before it, so if any record were changed or removed afterwards, the chain would break and the heading would say so in red. If you ever see a broken chain, tell IP Lynx straight away and don’t change anything.

Reading the reports fairly

  • Who is in uses each person’s last entry or exit read. It is only right where every way out has a reader. Somebody who leaves through a door with no reader still shows as in. Never use it as a fire roll call.
  • Attendance is first in and last out, by person, by day.
  • Quiet fobs lists fobs not used in 30, 60 or 90 days, or ever. These are the first ones to cancel.

A few minutes a week

How oftenWhat to check
DailyClear Alarms. Look at anything under Needs attention on Home.
WeeklyCheck Visitors for fobs still out. Confirm the audit log reads chain intact.
MonthlyRun Quiet fobs and cancel what nobody uses. Check move-outs were deactivated.
QuarterlyReview the team list and roles. Disable anyone who has left.

Something here out of date, or not what you see on screen? Tell us at support@iplynx.ca and we’ll fix the guide.

Still stuck?

Talk to a person.

Call us, open a ticket, or start from Help & Support. You get someone from IP Lynx, not a call centre.

Monday to Friday, 9 to 5 · Ontario, Canada