Move-ins, move-outs, lost fobs and visitor passes
Move-ins, move-outs, lost fobs and visitor passes
Set up a new person on one page, stop a lost fob in a minute, move someone out properly, and issue visitor passes that end on their own.
A new person’s fob, doors, unit, app and intercom listing are all set on one page. A lost fob stops working as soon as you save. A visitor’s access stops on its own.
Adding a person (a move-in or a new hire)
- People → Add. Enter their first and last name.
- Under Cards and fobs, tap Add card and enter the facility and card number printed on the fob.
- Under Access levels, choose the level that opens their doors (for example, Residents). Add a Starts or Expires date if they need one.
- For a resident, under Home and contact, enter their Unit, Email and Mobile.
- If your building uses the resident app, tick Give them the VantageCore app and choose what it may do: open their doors from the app (only the doors their own fob opens), issue visitor passes, book amenities.
- If your building has the intercom, tick List them on the intercom. Leave the dial code blank to use their unit number. Leave The panel shows on Unit number only unless they ask to have their name shown. Under A call to them rings, choose Their VantageCore app.
- Tap Add person. The fob works straight away. The door panel picks up the listing at its next sync.
Getting a resident into the app
Open their record. Under Sign in with their phone, tap Make an invitation. Send them the link, or let them scan the code from your screen. It works once, for three days, and making a new one cancels the old one. Point them to Answering the door with the VantageCore app.
A move-out: do both steps
- Open their record. Under Home and contact, set Moved out to their last day and save. Their app stops working the day after, and the door panel drops their listing at its next sync.
- On their last day, tap Deactivate (or remove their card).
A move-out date alone does not stop the fob. Deactivating does, at once, and it can be undone. The owner account can also Delete a person, which can’t be undone.
A lost or stolen fob
- Open the person and tap the bin beside the card.
- Say why: Returned, Lost or Stolen. Save. The fob stops opening doors as soon as you save.
- Add their replacement fob with Add card.
A lost or stolen number goes on People → Voided cards (lost or stolen) and can’t be given to anybody until you clear it there. If it turns up, clear it and it can be reused. Need new fobs? See Ordering fobs and cards.
A lost phone
- A resident: open their record and remove that phone under Their phones. Its sign-in ends at once. Then Make an invitation for the new one.
- A staff member: the owner account uses Reset authenticator.
- To stop someone’s app entirely, use Switch the app off on their record. Their fob keeps working.
Issuing a visitor or contractor pass
- More → Visitors → Issue a pass.
- Enter their Name and choose Kind: Visitor or Contractor. Add their company, who they are visiting, the unit and why they are here.
- Set From and Until, or tap 2h, 4h, 8h or Until 5pm.
- Choose the Doors they may use. If you hand them a fob, enter its number. Add a plate if your building runs parking.
- Tap Issue the pass.
The controller ends the pass at that minute, even if nobody remembers and even if the internet is down. Collect the fob on the way out.
Keeping track of passes
The tabs show who is In the building, who is Expected, and passes that are Finished. On each pass: Sign in, 1 hour more, or Revoke to end it now. Passes residents issue sets whether residents may issue their own, which doors those open, how long they last and how many a unit may have running.
Something here out of date, or not what you see on screen? Tell us at support@iplynx.ca and we’ll fix the guide.
Talk to a person.
Call us, open a ticket, or start from Help & Support. You get someone from IP Lynx, not a call centre.
Monday to Friday, 9 to 5 · Ontario, Canada